China Hot selling Industrial Flexible High-Performance Roller Chain Couplings for Transmission Equipment

Product Description

FEATURES
Manufactured according to relevant industrial standards 
Available in many sizes, ratings, and product types, including flexible shaft couplings and OK couplings 
Fabricated from a variety of high-grade steel 

BENEFITS
Several surface treatment processes protect against corrosion  
Customized products are available 
Large couplings withstand very high torque 
Flexible shaft couplings compensate for shaft misalignment

With more than 10 years in the power transmission industry, we are committed to the ongoing development and advancement of our products and services. Our focus on innovation is reflected in our continuously upgraded and modernized facilities, which allow us to meet the evolving needs of the market. Our state-of-the-art power transmission technology includes a selection of roller chain couplings that are ideal for a broad range of coupling applications. Our chain couplings are engineered to excel in any application you need, with exceptional flexibility, strength, and a surprisingly simple assembly.

ABOUT ROLLER CHAIN COUPLINGS
A roller chain coupling is a mechanical device composed of a double-strand roller chain and 2 modified sprockets. The design is simple and highly effective, despite its small size, and is composed of a robust chain and specially cut, hardened-tooth sprockets that allow a high amount of torque to be transmitted.

BENEFITS OF GIL’S ROLLER CHAIN COUPLINGS
COMPACT AND POWERFUL
In a roller chain coupling, torque is distributed across the combined mating surfaces of each of the chain and sprocket pitches, which allows the coupling to handle a high amount of torque for its size. The chain connects closely with the sprockets, for a highly compact and lightweight coupling that transmits torque with the utmost efficiency.

SAFE AND SMART
Our compact roller chain couplings are housed in an aluminum casing that clamps to the sprocket hubs and rotates with the body of the coupling without the need for bolts or other projections. The coupling chain itself is easy to install and remove using a single connecting pin, so you save on installation labor and downtime.

EASY ALIGNMENT
When working with shafts in a drive, traditional rigid couplings require extremely precise alignment between the coupled shafts. Roller chain couplings introduce much-needed flexibility with clearances both in the chain and between the chain and sprocket teeth. With this added mobility, even with minor misalignment, chain couplings can operate in a smooth and responsive manner, reducing the potential for overheating and wear common in more rigid coupling designs. The operation of roller chain couplings is less affected by unavoidable shaft expansion and contraction. The flexibility and easy alignment of the drive shafts, when using chain couplings, will save time and money on equipment repairs and replacements.

HOW TO INSTALL A ROLLER CHAIN COUPLING
Install oil seal to each hub
Adjust the alignment of the shafts and coupling components
Adjust the distance between the sprocket faces
Thoroughly lubricate the coupling chain
Install chain to couplings using a single-pin connecting link
Firmly close and fasten the cover of the coupling (optional, depending on operating conditions)

CHOOSE GIL FOR YOUR POWER TRANSMISSION NEEDS
To ensure optimal operation of low- or medium-speed, high-torque transmission applications, install GIL’s roller chain couplings. At GIL, we pride ourselves on providing the latest in power transmission technology. Our broad global presence allows us to serve customers almost anywhere in the world quickly and effectively.
 

Granville bearing manufacturer in the production of electric motor grade deep groove ball bearings, the company is committed to developing all kinds of precision radial ball bearings with an inner diameter of 2mm-100mm.

The factory covers an area of 58000 square meters, the company has advanced assembly lines and a perfect quality testing center. After more than 10 years of management and innovation, with more than 120 automatic production lines, various kinds of testing, and inspection instruments, with the annual production capacity of 160 million sets of reliable high precision quality bearings.
The comprehensive application of automation production lines is a premise to ensure product’s stable quality, what’s more, it is a mark that the enterprises improve to digital management modern high-tech manufacturer.

Seiko quality, the pursuit of excellence: the control and improvement of quality is the constant pursuit of Granville, in strict accordance with the system of the provisions of the quality of each process.
 

APQP: product quality advance plHangZhou
SPC: Statistical process control
MSA: Measurement system analysis
FMEA: Analysis of potential failure modes and consequences
PPAP: Production part approval procedure

In the factory testing laboratories, various bearing parts are examined in detail. The factory has its own professional bearing life tester, after bearing life and durability test, our bearings have the advantages of long service life, and high durability. We are keeping an introduction of the latest measurement and testing equipment. Quality procedures are based on extensive, repeatedly carried out product tests – both before inclusion in the range and after.

The Granville manufacturer takes her every effort in purchasing the most advanced bearing process equipment, automatic facilities are widely used in the factory and we keep investing to improve more.

Levels Applications Materials

We manufacture CZPT bearings, the advantage in manufacturing electric motor quality deep groove ball bearings up to ABEC-3, Z3-V3, ABEC-5 Z4-V4 level; A reliable production resource of high-quality repair parts for the CZPT operations of automotive and light truck manufacturers worldwide, over 1000 kits includes hub assemblies and 3 generations of wheel bearing designs; Granville foundry makes an extensive and full line of mounted bearing units and housings in industry-standard and custom configurations. Casting iron, ductile iron, stainless steel, and plastic materials are available.

Based on our experienced team and strict, effective supply chain management, Granville products deliver premium quality, and performance our customers have relied on for years. From a full range of bearings, mounted bearing units, power transmission products, and related markets around the world, we provide the industry’s most comprehensive range of qualified products available today.

Advantage Manufacturing Processesand Quality Control:

01 Heat Treatment

02 Centerless Grinding Machine 11200 (most advanced)

03 Automatic Production Lines for Raceway

04 Automatic Production Lines for Raceway

05 Ultrasonic Cleaning of Rings

06 Automatic Assembly

07 Ultrasonic Cleaning of Bearings

08 Automatic Greasing, Seals Pressing

09 Measurement of Bearing Vibration (Acceleration)

10 Measurement of Bearing Vibration (Speed)

11 Laser Marking

12 Automatic Packing

*Could you make a brief introduction to your all series of products?
Yes, we stock and sell factory-warrantied mechanical, electrical, and fluid-driven equipment such as bearings, belts, drives, motors, gears, couplings, clutches and brakes, linear motion, and hydraulics and pneumatics.

*How about your sales group?
At Granville, we understand a competent team makes your job easier, so we have established a group of employees who represent our resourcefulness and commitment to working hard to make sure your unique challenges are handled right the first time.

*What’s your solutions for maximizing customers’ benefits?
Our goal is to have your stock requirements on-hand when you need them. Through our storeroom surveys, in-depth communication, and usage analysis, we can reduce your organization’s inventory cost, supply room costs, and turn-around time.

*What’s your shipping document and documents of payment?
Our usual practice is FOB ZheJiang & T/T, and we could adjust them for your requirements.

*What’s the most convenient way to get your free quotation?
Please contact Stacy with your requirements (or Copy the contents of the table and fill in it with your information)

{Hi, this is Stacy, tailored solutions will be sent to you with your message 🙂

Can chain couplings accommodate parallel misalignment?

Yes, chain couplings are designed to accommodate a certain degree of parallel misalignment between the connected shafts. Parallel misalignment refers to the situation where the axes of the two shafts are not perfectly aligned and run parallel to each other but at a distance.

Chain couplings have some inherent flexibility that allows them to tolerate a certain amount of parallel misalignment. The flexibility is primarily provided by the roller chain, which can compensate for small parallel displacements between the shafts. This flexibility helps to reduce stress on the coupling components and allows for smooth operation even in the presence of parallel misalignment.

However, it is important to note that chain couplings have limitations in terms of parallel misalignment. Excessive parallel misalignment beyond the specified limits can lead to increased stress, uneven load distribution, accelerated wear, and potential coupling failure. The manufacturer’s specifications and guidelines should be followed to ensure that the parallel misalignment remains within the acceptable range for the specific chain coupling being used.

Proper alignment during installation is crucial to minimize parallel misalignment. The shafts should be aligned as closely as possible to ensure optimal performance and longevity of the chain coupling and the connected machinery or equipment. In some cases, additional measures such as shims or adjustable mounts may be necessary to achieve the desired alignment.

Regular inspection and maintenance of the chain coupling are also important to identify and address any parallel misalignment issues that may arise over time. If significant parallel misalignment is detected, corrective measures should be taken to realign the shafts or consider alternative coupling options that are better suited for parallel misalignment requirements.

In summary, chain couplings can accommodate a certain degree of parallel misalignment, but excessive misalignment should be avoided. Proper alignment during installation and adherence to manufacturer’s guidelines are essential for ensuring optimal performance, reliability, and longevity of the chain coupling and the connected machinery or equipment.

How to install a chain coupling?

Proper installation of a chain coupling is crucial for ensuring its optimal performance and longevity. Here are the steps to follow when installing a chain coupling:

1. Prepare the Work Area: Before beginning the installation, ensure that the work area is clean and free from any debris or contaminants. This will help prevent any damage to the coupling components during installation.

2. Inspect the Components: Carefully inspect the chain coupling components, including the sprockets, roller chain, connecting pins, and bushings or bearings. Check for any signs of damage or wear. Replace any components that are worn or damaged.

3. Position the Coupling: Position the coupling on the shafts that need to be connected. Ensure that the shafts are aligned properly and the coupling is centered between them.

4. Install the Sprockets: Slide the sprockets onto the shafts, with the teeth facing each other. Make sure the sprockets are securely seated on the shafts and aligned with each other.

5. Connect the Roller Chain: Loop the roller chain around the sprockets, ensuring that it is properly engaged with the sprocket teeth. Connect the ends of the roller chain using the connecting pins. Insert the connecting pins through the pin holes in the chain links and secure them with retaining clips or other fasteners.

6. Tension the Chain: Adjust the tension of the roller chain to the manufacturer’s specifications. The chain should have the appropriate amount of slack to allow for smooth operation and accommodate misalignment but should not be too loose or too tight. Follow the manufacturer’s guidelines for determining the correct chain tension.

7. Secure the Bushings or Bearings: If the chain coupling uses bushings or bearings, ensure they are properly installed in the bores of the sprockets and provide a secure and smooth rotation of the shafts.

8. Apply Lubrication: Apply the recommended lubricant to the roller chain and sprockets. Proper lubrication is essential for reducing friction, wear, and noise, and it helps ensure smooth operation of the chain coupling.

9. Check Alignment and Rotation: Once the chain coupling is installed, check the alignment of the shafts and the rotation of the coupling. Verify that the coupling rotates smoothly without any binding or interference.

10. Inspect and Test: After installation, thoroughly inspect the entire chain coupling assembly. Look for any signs of misalignment, unusual noise, or vibration. Test the coupling’s operation by running the machinery at a low speed and gradually increasing to the normal operating speed. Monitor the coupling for any issues or abnormalities.

Following these installation steps will help ensure a proper and secure installation of the chain coupling, promoting efficient power transmission and minimizing the risk of premature failure or damage.

What are the different types of chain couplings available?

Chain couplings come in various designs and configurations to suit different application requirements. Here are some common types of chain couplings:

• Standard Roller Chain Couplings: These are the most basic and widely used type of chain couplings. They consist of two sprockets connected by a roller chain. The sprockets have hardened teeth that engage with the chain rollers, providing a reliable power transmission. Standard roller chain couplings are generally suitable for applications with moderate torque and speed requirements.
• Double Roller Chain Couplings: Double roller chain couplings are similar to standard roller chain couplings but feature two parallel roller chains instead of one. This design increases the torque capacity and allows for higher power transmission. Double roller chain couplings are often used in applications that require higher torque and increased load-bearing capabilities.
• Silent Chain Couplings: Silent chain couplings, also known as inverted-tooth chain couplings, use a special toothed chain with a meshing sprocket design. The teeth of the chain engage with the sprocket grooves, providing a smooth and quiet operation. Silent chain couplings are commonly used in applications where noise reduction is important, such as precision machinery or equipment operating in noise-sensitive environments.
• Heavy-Duty Chain Couplings: Heavy-duty chain couplings are designed for applications that demand robust and rugged performance. They are constructed with larger sprockets and heavy-duty roller chains to handle high torque and heavy loads. These couplings are commonly used in industries such as mining, steel, and paper manufacturing, where extreme operating conditions and heavy machinery are present.
• Flexible Chain Couplings: Flexible chain couplings incorporate an elastomeric element, such as a rubber or polyurethane insert, between the sprockets and the chain. This element provides flexibility, damping, and some degree of misalignment compensation. Flexible chain couplings are suitable for applications that require shock absorption, vibration damping, and moderate misalignment tolerance.
• Stainless Steel Chain Couplings: Stainless steel chain couplings are specifically designed for applications that require corrosion resistance and sanitation, such as food processing, pharmaceutical, and chemical industries. They are made of stainless steel or other non-corrosive materials to withstand harsh environments and maintain hygienic conditions.

These are just a few examples of the different types of chain couplings available. Each type has its own advantages and is suitable for specific application requirements. It is important to carefully consider the torque, speed, misalignment, environmental factors, and other application-specific needs when selecting the appropriate chain coupling type for your particular application.

editor by CX 2023-08-11